Our new Bull Rider dual mode sulky is a good example. In the past, contractors had to make a choice between a fixed position type sulky with casters, or a trailing type, then live with its shortcomings. With the Bull Rider, you can quickly and easily switch modes in the field. Run it in the ''fixed position'' mode to safely utilize the reverse capability of hydro-drive mowers. Run it in the "trailing type " mode behind small belt drives with less pulling power, and so on. Ground and mowing conditions are constantly changing. With Bull Rider, you have the flexibility to change with them."; } if (myItem == 'B') { output = "BR-1 provides absolute security for your backpack blowers.
Simply hang blower on hook. The automatic latch with stainless steel spring positively secures the blower. Backrest has holes for attaching an optional stretch cord.
This holder will secure and protect your hedge trimmers on open or enclosed trailers.Use the sheath only in (SO-1) enclosed trucks and trailers.
To prevent theft, simply install a padlock to the blade.
(24 in. and longer)
"; output = output + "A heavy duty stretch cord is included to secure the trimmer in place. Thick, replaceable rubber cushions protect your gearbox and powerhead.
On open trailers, hedge trimmers are stored in a vertical position which uses less space and helps protect trimmers from damage."; } if (myItem == 'E') { output =" TT-2 Wall Mounted Rack
Whether you choose the TT-2 "Original" (holds 3) or the "TT-2 PRO-4" (holds4) you will have piece of mind knowing your trimmers are protected from theft and damage, yet easily accessible."; output = output + "
Unlike other "wannabe copy cat" racks, the TT-2 can be loaded in only two seconds.Trimmers are automatically latched and tightly clamped in place, completely eliminating any chance for operator error. There are no time consuming pins to fumble with or forget";
}
if (myItem == 'F') {
output = "HT1 HT12
HT-1 Accessory Hand Tool Rack
Used in conjunction with either one of our Trimmer Racks the HT-1 is the low cost answer to storage of rakes, shovels, brooms, etc. Simple bolt on installation will fit all existing Trimmer Trap Trimmer Racks. "; output = output + "
Used in conjunction with either one of our Trimmer Racks the HT-1 is the low cost answer to storage of rakes, shovels, brooms, etc. Simple bolt on installation will fit all existing Trimmer Trap Trimmer Racks. "; output = output + "
How many times have your mowers and other equipment been damaged from rolling around on the truck or trailers? KreeperKeepers unique patented* design will help prevent this damage and maybe even stop a thief! KreeperKeepers will pay for themselves time and time again! "; } if (myItem == 'I') { output ="KK-2 Kreeper Keepers
How many times have your mowers and other equipment been damaged from rolling around on the truck or trailers? KreeperKeepers unique patented* design will help prevent this damage and maybe even stop a thief! KreeperKeepers will pay for themselves time and time again! "; } if (myItem == 'J') { output = "SR-1 Backpack Sprayer Rack
Backpack sprayers are difficult to deal with when not being used. They fall over and slide around in the back of your truck. They spill and get broken and run over by other equipment. The SR-1 will prevent all of these problems, Works for Solo, Lesco, Echo sprayers and more. Heavy gauge"; output = output + "1 1/2" square tube provides super strength. Plated finish resists chemicals. "; output = output + "
Once the 2" adjustable strap is in place the sprayer is securely held down and will not move around! Install a padlock in place of lynch pin to secure against theft."; } if (myItem == 'K') { output ="Fuel Identification Tags
Even intelligent well educated people sometimes don’t know the difference between a two-stroke and a four-stroke engine. End the risk and confusion of not knowing which fuel goes where, once and for all. These anodized aluminum tags provide three visual means for identifying the proper fuel for each piece of you equipment, you don’t even have to be able to read English."; output = output + "
Simply attach the appropriate tag to every tool and each fuel can. Workers can now easily identify the proper fuel when re-fueling. An investment of only a few dollars can save hundreds of dollars by preventing a simple mistake."; } if (myItem == 'L') { output =" TT-2 Tall-Thin Trimmer Rack
Whether you choose the TT-2 "Original" (holds 3) or the "TT-2 PRO-4" (holds4) you will have piece of mind knowing your trimmers are protected from theft and damage, yet easily accessible."; output = output + "
Unlike other "wannabe copy cat" racks, the TT-2 can be loaded in only two seconds.Trimmers are automatically latched and tightly clamped in place, completely eliminating any chance for operator error. There are no time consuming pins to fumble with or forget"; } if (myItem == 'M') { output ="TR-1 Portable Hand Tool Rack
"e;Base Mount" provides the height needed for use on open trailers or can be shortened for use on pick up trucks. Installing a "Base Mount" and/or a " Quick Coupler" to each vehicle assure Quick Switch over of "Rack Unit". "; output = output + "
The adjustable "Quick Coupler" provides the offset needed for mounting on pick up trucks and utility vehicles. Use it in conjunction with a "Base Mount" or by itself as a mounting location.
By pulling a single "Quick Release Pin" the "Rack Unit" can be removed in seconds and placed on another vehicle or stored in the shop overnight with no need to remove the individual tools. Heavy Gauge Plated Steel construction stands up to weather and years of hard use.";
}
if (myItem == 'N') {
output ="TT-1 Trimmer Rack
Perfect for semi-pros and small contractors who only need to carry two trimmers. Also popular with larger contractors for carrying “Stick edgers” or spare trimmers.";
output = output + "
Whether you choose the TT-2 "Original" (holds 3) or the "TT-2 PRO-4" (holds4) you will have piece of mind knowing your trimmers are protected from theft and damage, yet easily accessible."; output = output + "
Unlike other "wannabe copy cat" racks, the TT-2 can be loaded in only two seconds.Trimmers are automatically latched and tightly clamped in place, completely eliminating any chance for operator error. There are no time consuming pins to fumble with or forget"; } ItemWindow.document.open(); ItemWindow.document.write("